The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium like:
Auto-Top-Off (ATO) ATO will likely be the most popular use for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below. This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to the tank. It also has a vertically oriented design with a bottom intake and top output that is perfect for use in jugs or other RO containers. Just drop it in!Run your reactors safely and with less energy
The PMUP is not just for ATO. It is also a great pump to use for running your various reactors bio-pellets, carbon, GFO. The PMUP uses less than 20W of power so it is a very efficient way to run reactors and adds very little heat to your aquarium. We’re certain there will be many other uses found for the PMUP we’ve not even considered yet.
Easy to connect with standard tubing and fittings
The PMUP Has a smooth, 3/8 in. (9.5mm) output that will easily connect to silicon tubing or standard push-fit connectors.
Dimensions – 4.58 in. x 2.24 in.
Output – 100gph @ 0 ft. Max Head – 14 ft.
Power – 17W
Apex (any model) 1Link module or Energy Bar 832 with available DC24 accessory port
Average rating based on 1 review(s)
Not as energy efficient as other pumps and can generate a bit of heat. You can't remove the impeller if something gets stuck inside. When this happens it gets noisy and you can't fix it. The pump can get noisy with back pressure from reactors. Better to use this pump for auto-water top-offs only (ATK).