Additional Information

These powerful pumps feature a ceramic, magnetic impeller and are ideal for aquarium applications as well as water gardens, ponds and statuary. They are safe for fresh or saltwater use and can be used submersed or inline. The directional flow output can be used in any orientation and the pump includes a sponge prefilter for submersible operation. Maximum flow rate is 1800 gph. Has a 3/4" NPT threaded inlet/outlet and a 10' cord. Three year limited warranty. U.L. and Canadian U.L. listed. (These pumps are made with environmentally friendly material; epoxy encapsulated motor, not oil filled.) Pumping flow versus pumping height table

Maintenance: For pumps used in Saltwater or Hardwater applications. The magnetic impeller assembly should be removed and cleaned every six weeks in order to remove calcium and mineral deposits. The following procedure is recommended. Remove the face plate and disassemble the impeller assembly by removing one end cap (you may need to pull with some force) and sliding the magent body off the shaft. Note the position of any washers used behind the end caps. Soak the shaft and magnet body in a bath of undiluted white vinegar for a minimum of 8 hours, or over night. (Note: keeping a spare impeller to "switch off" with while cleaning the current impeller will avoid shutting down your system for 8 hours.) Gently scrub both pieces with a tooth brush, under running water, to clean off any calcium or scale accretions which may have accumulated. While you have it apart, be sure to check all parts for uneven wear or damage. Reassemble parts, taking care to replace the nylon washers, re-insert the impeller assembly and replace the cover and screws.

Pump Specifications

Model Number	Max Height (pump shutoff)	GPH @ 1ft. head	Wattage & Amps	Inlet Size Outlet Size	Features	Pump Size L"xW"xH"
Mag-Drive 250	7.0'	250	24 0.3	1/2" NPT 1/2" NPT	Inline or Submerged Ceramic Shaft	5.0x3.8x4.2
Mag-Drive 350	10.5'	350	35 0.6	1/2" NPT 1/2" NPT	Inline or Submerged Ceramic Shaft	5.0x3.8x4.2
Mag-Drive 500	10.5'	450	45 0.8	1/2" NPT 1/2" NPT	Inline or Submerged Ceramic Shaft	5.0x3.8x4.2
Mag-Drive 700	12.5'	650	60 1.3	1/2" NPT 1/2" NPT	Inline or Submerged Ceramic Shaft	5.0x3.8x4.2
Mag-Drive 950	14.0'	950	93 1.33	3/4" NPT 3/4" NPT	Inline or Submerged Ceramic Shaft	5.5x3.4x5
Mag-Drive 1200	15.0'	1200	110 1.5	3/4" NPT 3/4" NPT	Inline or Submerged Ceramic Shaft	6.4x4.5x4.6
Mag-Drive 1800	20.0'	1800	145 1.5	3/4" NPT 3/4" NPT	Inline or Submerged Ceramic Shaft	6.4x4.5x4.6
Mag-Drive 2400	20.0'	2400	265 3.0	1.0" NPT 1.0" NPT	Inline or Submerged Ceramic Shaft	7.5x4.0x6.0
Mag-Drive 3600	24.0'	3600	380 3.0	1.0" NPT 1.0" NPT	Inline or Submerged Ceramic Shaft	7.5x4.0x6.0

Visit Manufacturer's Web Site