The Kamoer ATO One is a smart water replenishing device that requires only the sensor and the refill pump to be installed. It can be used after power-on without setting any parameters. It can be used without powering any parameters. Standard 1 optical level sensor and 1 float level sensor. The optical level sensor is used to monitor the water level to determine whether water needs to be replenished. The float level sensor is used to prevent overflow. An optional float level sensor is available to monitor the freshwater reservoir for water shortage. ATO One is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One will have an indicator light and a buzzer alarm.

Note
Please use the power adapter that comes with the product.
The optical level sensor should be away from the air bubbles; otherwise it will be misunderstood due to interference.
The optical liquid level sensor is susceptible to the influence of dirt. Please pay attention to erasing the dirt on the sensor.
This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and humidity <80%.

Warranty
We warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must be furnished.

The followings are excluded from the warranty:
1. Improper use of the device causing malfunction;
2. The device is repaired or modified by an unauthorized person;
3. Use of non-produced material by our company i.e. pump tube;
4. Damage by disaster;
5. Improper maintenance causing damage;
6. Use of reagent or sample causing corrosion;
7. Damage by accident or over load;
8. Consumables, such as silicone tube and fuse etc.

To obtain warranty support, you may contact our local technical support. Our technical support will attempt to diagnose and correct the problem. If the problem cannot be rectified, our technical support will ask you to return the product. You will be asked to furnish proof of purchase to confirm that the product is still under warranty.

What's in the box?
1 x ATO One controller
1 x S1 Float sensor
1 x S2 Optical sensor
1 x Optical sensor bracket
1 x Float sensor bracket
4 x Plastic magnetic stickers
1 x DC 12V Power supply
1 x Refill pump
1 x Tube holder
1 x Siphon break
2 x PVC tubing